planetwatt.com

Help and Support => Archives => wattOS R10 => Topic started by: gychang on March 17, 2017, 12:50:17 PM

Title: no sound on microWatt R10, help
Post by: gychang on March 17, 2017, 12:50:17 PM
I have following:

apa@i3-Main:/proc/asound$ cat cards
 0 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0xf7f10000 irq 30
 1 [HDMI           ]: HDA-Intel - HDA ATI HDMI
                      HDA ATI HDMI at 0xf7e30000 irq 31
 2 [U0x46d0x825    ]: USB-Audio - USB Device 0x46d:0x825
                      USB Device 0x46d:0x825 at usb-0000:00:14.0-2, high speed

when I change the card on alsamixer to 1, I only get control for s/pdif, no "master" or "PCM" etc.

on my alsa-base.conf is below
Code: [Select]
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7

# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; }
#
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; }
#
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }

# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
# Keep snd-pcsp from being loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2

How do I set to the correct card and have the volume adjuster?
Title: Re: no sound on microWatt R10, help
Post by: biffster on March 25, 2017, 05:17:20 PM
I have had this problem in the past, if you have not fixed it yet, I'll break out a laptop and plug it into an HDMI monitor and see if I can replicate and give you the steps. :) - Thanks for being patient.
Title: Re: no sound on microWatt R10, help
Post by: gychang on April 07, 2017, 11:03:05 PM
I have had this problem in the past, if you have not fixed it yet, I'll break out a laptop and plug it into an HDMI monitor and see if I can replicate and give you the steps. :) - Thanks for being patient.

thanks, got it working, appreciate the followup.
Title: Re: no sound on microWatt R10, help
Post by: prassee on November 29, 2017, 05:42:58 AM
Hi ,

I am still facing the same issue.

On a fresh install I can hear sound.
However after  sudo apt-get upgrade, (I'm sure this updates alsa related stuff)  the sound stops working.
I'm using Lenovo e470 with built-in intel sound card.