Please notice that you do not perform what gerry beale contributes it to in update maneger not starting.
"lightbulb" is new wattOS logo definitely. (This is operation for LXDE, what go "open the menu")
but I noticed that an update manager did not work by a different problem in my environment.
A problem seems to occur in gksu.
I worked again and confirmed improvement.
I did make a little mistake on my last post.. the lightbulb was 7.5 and earlier editions.......
For those on newer versions of watt... its the bottom left corner (volume dial looking icon) *my bad*
This article was written for 32 bit lxde wattos r8 (which i have fully installed and running at time of this .. and last post.. on virtual machine)
in the "start menu" , bottom left corner, you click on that , click run, then type gksu-properties this will list the sudo options..
you will see the menu come up saying "Privilege Granting Preferences"
it has 2 options ... Behaviour <-----> Screen Grabbing
Behaviour by default is set to su
this has to change to sudo.
Then update manager will work correctly.
My post was accurate apart from the lightbulb icon. I retested this morning to double check on a clean install on vm as on testing the beta builds i encountered this issue and was given this advice by BiffBaxter "Can you launch either from command line with sudo? Also check gksu-properties and see if it's su or sudo (should be sudo)" when i queried update manager problems
Microwatt has "Run program" on a menu(click the right button).
MATE version substitutes it in a terminal.
This improves the work by other superusers.
example: root user of PCmanFM and Caja
Yes..this appears to be an installer bug, and a setting I did change during the build process because the livecd has it set to sudo if you check.., but after install it changes back to su.
First time using this type of installer, so I will need to research a bit.
Thanks for the screens and write up..I will pin this for others.